non mi masterizza più i cd, i dvd si invece.
mi partono ma dopo un pò mi da errore di lettura e espelle il disco.
vedendo dalle proprietà hardware
mi da questo nome per il masterizzatore:
HL-DT-ST DVDRAM GMA-4082N
ma non l'ho mai sentite,quindi non posso neanche fare un eventuale agg. firmware
fa parte di un portatile "HP pavilion 5236eu"
grazie mille
cmq
ecco i log
- Codice: Seleziona tutto
1K22-1867-0795-66M4-5716-0059-****
Windows XP 5.1
IA32
WinAspi: -
NT-SPTI used
Nero Version: 8.3.2.1
Internal Version: 8, 3, 2, 1
(Nero Express)
Recorder: <HL-DT-ST DVDRAM GMA-4082N>Version: HQ04 - HA 1 TA 0 - 8.3.2.1
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default
CD-ROM: <HL-DT-ST DVDRAM GMA-4082N>Version: HQ04 - HA 1 TA 0 - 8.3.2.1
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : ST980829A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GMA-4082N atapi Port 1 ID 0 DMA: On
CdRomPeripheral : XO7721Q LUI343J 1.01 a5lv0mnr Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GMA-4082N F: CdRom0
XO7721Q LUI343J G: CdRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 894MB (915632kB)
Free physical memory: 489MB (500928kB)
Memory in use : 45 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
3.6.2008
CD-ROM (ISO)
1.23.08 #1 Text 0 File SCSIPTICommands.cpp, Line 450
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
1.23.09 #2 Text 0 File Isodoc.cpp, Line 6713
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
1.23.09 #3 Text 0 File Burncd.cpp, Line 3238
HL-DT-ST DVDRAM GMA-4082N
Protezione buffer underrun attivato
1.23.09 #4 ISO9660GEN -11 File Geniso.cpp, Line 3349
First writeable address = 0 (0x00000000)
1.23.09 #5 Text 0 File ThreadedTransferInterface.cpp, Line 1027
Removed 2 run-out blocks from end of track 0. Length: 353264 -> 353262.
1.23.09 #6 Text 0 File Burncd.cpp, Line 3568
Turn on Track-At-Once, using CD-R/RW media
1.23.10 #7 Text 0 File ThreadedTransferInterface.cpp, Line 1027
Removed 2 run-out blocks from end of track 1. Length: 353264 -> 353262.
1.23.10 #8 Text 0 File FilesystemSettingsValidator.cpp, Line 142
FS Settings: using validator 'CUDFSettingsValidatorCD'
ParamMode = 'automatic', changing UDF partition type from 'physical' to 'physical'
Changing UDF revision from '1.02' to '1.02'
1.23.10 #9 Text 0 File ThreadedTransferInterface.cpp, Line 1027
Removed 2 run-out blocks from end of track 1. Length: 353264 -> 353262.
1.23.11 #10 Text 0 File DlgWaitCD.cpp, Line 311
Last possible write address on media: 359847 ( 79:59.72)
Last address to be written: 353263 ( 78:32.13)
1.23.11 #11 Text 0 File DlgWaitCD.cpp, Line 323
Write in overburning mode: NO (enabled: CD)
1.23.11 #12 Text 0 File DlgWaitCD.cpp, Line 2932
Recorder: HL-DT-ST DVDRAM GMA-4082N;
CDR code: 00 97 34 23; OSJ entry from: Mitsubishi Chemical
ATIP Data:
Special Info [hex] 1: C0 00 98, 2: 61 22 17 (LI 97:34.23), 3: 4F 3B 49 (LO 79:59.73)
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)
1.23.11 #13 Text 0 File DlgWaitCD.cpp, Line 497
>>> Protocol of DlgWaitCD activities: <<<
=========================================
1.23.11 #14 Text 0 File ThreadedTransferInterface.cpp, Line 754
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 353264 (353264) = #353264/78:30.14
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 353262 blocks [F: HL-DT-ST DVDRAM GMA-4082N]
--------------------------------------------------------------
1.23.11 #15 Text 0 File ThreadedTransferInterface.cpp, Line 956
Prepare [F: HL-DT-ST DVDRAM GMA-4082N] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 723791872, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
-150 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
-150 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 353264 | 0 | 0x00
353264 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
1.23.11 #16 Text 0 File ThreadedTransferInterface.cpp, Line 1027
Removed 2 run-out blocks from end of track 1. Length: 353264 -> 353262.
1.23.45 #17 Text 0 File SCSIPTICommands.cpp, Line 264
Error on LockVolume: Accesso negato.
1.23.45 #18 Text 0 File SCSIPTICommands.cpp, Line 314
SPTI - Error 5 on DismountVolue: Accesso negato.
1.24.06 #19 Text 0 File SCSIPTICommands.cpp, Line 264
Error on LockVolume: Accesso negato.
1.24.06 #20 Text 0 File Burncd.cpp, Line 4359
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)
1.24.06 #21 Phase 24 File dlgbrnst.cpp, Line 1767
Caching of files started
1.24.06 #22 Text 0 File Burncd.cpp, Line 4481
Cache writing successful.
1.24.06 #23 Phase 25 File dlgbrnst.cpp, Line 1767
Caching of files completed
1.24.06 #24 Phase 36 File dlgbrnst.cpp, Line 1767
Burn process started at 24x (3.600 KB/s)
1.24.07 #25 Text 0 File ThreadedTransferInterface.cpp, Line 2673
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
1.24.08 #26 Text 0 File MMC.cpp, Line 22530
Set BUFE: Buffer underrun protection -> ON
1.24.08 #27 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 83836800
1.25.09 #28 SPTI -1040 File SCSIPassThrough.cpp, Line 196
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1040)
CDB Data: 0x2A 00 00 00 59 60 00 00 20 00 00 00
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x10
Sense Qual: 0x00
Sense Area: 0x70 00 03 00 00 00 00 10 34 1D 04 80 10
Buffer x0d0eb300: Len x10000
0xEF AE 03 1B 72 93 4B 58 78 AB 79 B4 2C DB DA C8
0x90 DE F1 CE 6A 95 38 A5 9D F6 1C 73 4C C8 12 61
0x7B E3 46 54 61 03 EE 74 6F BD 80 A6 83 01 70 66
1.25.09 #29 CDR -1040 File Writer.cpp, Line 306
Illegal block size for command
F: HL-DT-ST DVDRAM GMA-4082N
1.25.09 #30 SPTI -1040 File SCSIPassThrough.cpp, Line 196
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1040)
CDB Data: 0x35 00 00 00 00 00 00 00 00 00 00 00
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x10
Sense Qual: 0x00
Sense Area: 0x71 00 03 00 00 00 00 10 34 1D 04 80 10
1.25.09 #31 CDR -1040 File WriterStatus.cpp, Line 322
Illegal block size for command
F: HL-DT-ST DVDRAM GMA-4082N
1.25.09 #32 TRANSFER -18 File WriterStatus.cpp, Line 322
Could not perform EndTrack
1.25.09 #33 CDR -201 File WriterStatus.cpp, Line 325
Invalid write state
F: HL-DT-ST DVDRAM GMA-4082N
1.25.09 #34 TRANSFER -18 File WriterStatus.cpp, Line 325
Could not perform EndTrack
1.25.09 #35 Text 0 File MMC.cpp, Line 17306
<HL-DT-STDVDRAM GMA-4082N> start Close Track #2
1.25.10 #36 Phase 38 File dlgbrnst.cpp, Line 1767
Burn process failed at 24x (3.600 KB/s)
1.25.10 #37 Text 0 File SCSIPTICommands.cpp, Line 314
SPTI - Error 5 on DismountVolue: Accesso negato.
1.25.13 #38 Text 0 File Cdrdrv.cpp, Line 11420
DriveLocker: UnLockVolume completed
1.25.13 #39 Text 0 File SCSIPTICommands.cpp, Line 450
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
ed
- Codice: Seleziona tutto
1C81-A0K5-19E5-MAAX-400E-05AM-****
Windows XP 5.1
IA32
WinAspi: -
NT-SPTI used
Nero Version: 7.9.6.0
Internal Version: 7, 9, 6, 0
Recorder: <HL-DT-ST DVDRAM GMA-4082N>Version: HQ04 - HA 1 TA 0 - 7.9.6.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <HL-DT-ST DVDRAM GMA-4082N>Version: HQ04 - HA 1 TA 0 - 7.9.6.0
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : ST980829A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GMA-4082N atapi Port 1 ID 0 DMA: On
CdRomPeripheral : XO7721Q LUI343J 1.01 a94a1xdr Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GMA-4082N F: CdRom0
XO7721Q LUI343J G: CdRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 894MB (915632kB)
Free physical memory: 390MB (400124kB)
Memory in use : 56 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
2.6.2008
CD-ROM (ISO)
23.31.47 #1 Text 0 File SCSIPTICommands.cpp, Line 424
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
23.31.47 #2 Text 0 File Isodoc.cpp, Line 6663
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
23.31.47 #3 Text 0 File Burncd.cpp, Line 3196
HL-DT-ST DVDRAM GMA-4082N
Protezione buffer underrun attivato
23.31.47 #4 ISO9660GEN -11 File Geniso.cpp, Line 3343
First writeable address = 0 (0x00000000)
23.31.47 #5 Text 0 File Burncd.cpp, Line 3508
Turn on Disc-At-Once, using CD-R/RW media
23.31.48 #6 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 359847 ( 79:59.72)
Last address to be written: 353264 ( 78:32.14)
23.31.48 #7 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD)
23.31.48 #8 Text 0 File DlgWaitCD.cpp, Line 2964
Recorder: HL-DT-ST DVDRAM GMA-4082N;
CDR code: 00 97 34 23; OSJ entry from: Mitsubishi Chemical
ATIP Data:
Special Info [hex] 1: C0 00 98, 2: 61 22 17 (LI 97:34.23), 3: 4F 3B 49 (LO 79:59.73)
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)
23.31.48 #9 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================
23.31.48 #10 Text 0 File ThreadedTransferInterface.cpp, Line 793
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 353265 (353265) = #353265/78:30.15
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 353265 blocks [F: HL-DT-ST DVDRAM GMA-4082N]
--------------------------------------------------------------
23.31.48 #11 Text 0 File ThreadedTransferInterface.cpp, Line 995
Prepare [F: HL-DT-ST DVDRAM GMA-4082N] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 723793920, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
-150 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
-150 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 353265 | 0 | 0x00
353265 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
23.31.48 #12 Text 0 File SCSIPTICommands.cpp, Line 215
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME
23.31.48 #13 Text 0 File Burncd.cpp, Line 4294
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)
23.31.48 #14 Phase 24 File dlgbrnst.cpp, Line 1762
Caching of files started
23.31.48 #15 Text 0 File Burncd.cpp, Line 4413
Cache writing successful.
23.31.48 #16 Phase 25 File dlgbrnst.cpp, Line 1762
Caching of files completed
23.31.48 #17 Phase 36 File dlgbrnst.cpp, Line 1762
Burn process started at 24x (3.600 KB/s)
23.31.48 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2721
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
23.31.48 #19 Text 0 File MMC.cpp, Line 17687
StartDAO : CD-Text - Off
23.31.48 #20 Text 0 File MMC.cpp, Line 22363
Set BUFE: Buffer underrun protection -> ON
23.31.48 #21 Text 0 File MMC.cpp, Line 17915
CueData, Len=32
41 00 00 14 00 00 00 00
41 01 00 10 00 00 00 00
41 01 01 10 00 00 02 00
41 aa 01 14 00 4e 20 0f
23.31.48 #22 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 83836800
23.32.03 #23 Text 0 File Cdrdrv.cpp, Line 1352
23:32:03.953 - F: HL-DT-ST DVDRAM GMA-4082N : Queue again later
23.33.35 #24 SPTI -1040 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1040)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x10
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 59 60 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 10 34 1D 04 80 10
Buffer x0bd0b300: Len x10000
0x90 52 05 D8 41 FD 72 87 50 0A 82 A6 8B 20 F5 B6
0x89 98 F9 29 87 42 FB 18 D5 BC F8 8D 02 2A E3 4A
0xC1 80 A3 E7 EF 4B 92 D2 A7 AB 05 22 B4 F0 F0 F5
23.33.35 #25 CDR -1040 File Writer.cpp, Line 303
Illegal block size for command
F: HL-DT-ST DVDRAM GMA-4082N
23.33.36 #26 SPTI -1040 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1040)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x10
Sense Qual: 0x00
CDB Data: 0x35 02 00 00 00 00 00 00 00 00 00 00
Sense Area: 0x71 00 03 00 00 00 00 10 34 1D 04 80 10
23.33.36 #27 CDR -1040 File WriterStatus.cpp, Line 162
Illegal block size for command
F: HL-DT-ST DVDRAM GMA-4082N
23.33.36 #28 TRANSFER -24 File WriterStatus.cpp, Line 162
Could not perform end of Disc-at-once
23.33.37 #29 Phase 38 File dlgbrnst.cpp, Line 1762
Burn process failed at 24x (3.600 KB/s)
23.33.37 #30 Text 0 File SCSIPTICommands.cpp, Line 261
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
23.33.40 #31 Text 0 File Cdrdrv.cpp, Line 11185
DriveLocker: UnLockVolume completed
23.33.40 #32 Text 0 File SCSIPTICommands.cpp, Line 424
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)